Stability constants of some bivalent metal complexes of N-phenyl-o-tolylbenzohydroxamic acid

The stability constants of the Cu²⁺, Zn²⁺, Ni²⁺ and Mu²⁺ complexes of N-phenyl-o-methoxybenzohydroxamic acid at 30° in 50% v/v aqueous dioxan are: log K₁ 10·45, 8·16, 7·52, 6·33; log K₂ 8·90, 6·70, 6·01, 5·59 (for the ions in the order given).     

Molecular octopus: octa functionalized calix[4]resorcinarene-hydroxamic acid [C4RAHA] for selective extraction, separation and preconcentration of U(VI)

A solvent extraction separation of uranium, in the presence of thorium, cerium and lanthanides with a new calix[4]resorcinarene bearing eight hydroxamic acid groups (C4RAHA) is described. Quantitative extraction of uranium is possible in ethyl acetate solution of C4RAHA at pH 8.0. The lambda(max) and molar absorptivity (varepsilon) for uranium is 356nm and 8352Lmol(-1)cm(-1). The Binding ratio of uranium with C4RAHA as evaluated by Job's method is 4:1. The system obeys Beer's law over the range 0.075-6.0mugml(-1) of uranium with Sandell sensitivity 0.0284mugcm(-2). A preconcentration factor of 142 was achieved by directly aspirating the extract for GF-AAS measurements. The two-phase stability constant evaluated at 25 degrees C for uranium is 15.91. The complexation is characterized by favorable enthalpy and entropy changes. A liquid membrane transport study of uranium was carried out from source to the receiving phase under controlled conditions and a mechanism of transport is proposed. Uranium has been determined in standard and environmental samples.     

Solid-phase extractive preconcentration and separation of lanthanum(III) and cerium(III) using a polymer-supported chelating calix [4] arene resin

In the present paper, solid-phase extractive preconcentration and separation of lanthanum(III) and cerium(III) using calix[4]arene-o-vanillinsemicarbazone immobilized on a polymeric matrix, a Merrifield peptide resin, is proposed. The diamino derivative of calix[4]arene was first diazotized and coupled with o-vanillinsemicarbazone to obtain a new “upper-rim” functionalized calix[4]arene-o-vanillinsemicarbazone. It was then covalently linked to the Merrifield peptide resin and characterized by FT-IR and elemental analysis. Quantitative studies were carried out by spectrophotometry and ICP-AES with a relative standard deviation of 1.7%. Various physicochemical parameters like pH, concentration of eluting agents, flow rate, total sorption capacity, metal-ligand stoichiometry, exchange kinetics, preconcentration factor, distribution coefficient, breakthrough capacity, resin stability, and effect of electrolytes and associated metal ions have been studied. The uptake and stripping of these metal ions on the resin was fast, indicating a better accessibility of La(III) and Ce(III) towards the chelating sites. Detection limits corresponded to three times the standard deviation of the blank (3σ_B) and amounted to 3.05 and 6.86 μg/L, along with preconcentration factors of 153 and 133 for La(III) and Ce(III), respectively. The robustness of the procedure is demonstrated by the recoveries obtained (>97.5%) for La(III) and Ce(III) in the presence of several cations and anions. The proposed method was satisfactorily applied to the separation of La(III) and Ce(III) from each other and also from U(VI) and Th(IV) by sequential acidic elution and varying pH. The validity of the method was tested by analyzing these metal ions in monazite sand and standard geological materials. The text was submitted by the authors in English.     

Bianchi type II,VIII, and IX cosmological models in Lyra's geometry

The Bianchi type II, VIII, and IX models are investigated in Lyra's geometry (in normal gauge) when the gauge function is time dependent. The physical behavior of these models in vacuum and in the presence of the Zeldovich fluid is discussed.     

HPTLC method for determination of nevirapine in pharmaceutical dosage form

A sensitive, selective, precise and stability-indicating high-performance thin-layer chromatographic method of analysis of nevirapine both as a bulk drug and in formulations was developed and validated. The solvent system consisted of toluene-carbon tetrachloride-methanol-acetone-ammonia (3.5:3.5:2.0:1.0:0.05, v/v/v/v/v). Densitometric analysis of nevirapine was carried out in the absorbance mode at 289nm. This system was found to give compact spots for nevirapine (R(f) value of 0.44+/-0.02). Nevirapine was subjected to acid and alkali hydrolysis, oxidation, dry heat and wet heat treatment and photodegradation. The drug undergoes degradation under acidic, basic conditions and oxidation. Also the degraded products were well resolved from the pure drug with significantly different R(f) values. Linearity was found to be in the range of 30-1000ng/spot with significantly high value of correlation coefficient. The linear regression analysis data for the calibration plots showed good linear relationship with r(2)=0.998+/-0.002 in the working concentration range of 300ng/spot to 1000ng/spot. The mean value of slope and intercept were 0.073+/-0.005 and 36.78+/-1.50, respectively. The method was validated for precision, robustness and recovery. The limit of detection and quantitation were 5 and 10ng/spot, respectively. As the method could effectively separate the drug from its degradation products, it can be employed as a stability indicating one. Moreover, the proposed HPTLC method was utilized to investigate the kinetics of acid degradation process. Arrhenius plot was constructed and activation energy was calculated.     

Separation and gravimetric determination of cerium and lanthanum with N-m-tolyl-m-nitrobenzohydroxamic acid

Cerium and lanthanum were determined gravimetrically by selective precipitation with N-m-tolyl-m-nitrobenzohydroxamic acid and separated from several metal ions such as Ag(+), Be(2+) , Pb(2+) , Mn(2+) , Cu(2+), Zn(2+) , Cd(2+) , Hg(2+) , Pd(2+) , Ga(3+) A1(3+) , Bi(3+) , Sb(3+), Sn(4+), Ce(3+) , Pr(3+) , Nd(3+) , Ti(4+), Zr(4+), Th(4+), V(5+) , Mo(6+) and U(6+) . The precipitates were weighted directly after drying at 110 degrees . The analytical results indicated the composition of the complexes to be (C(14)H(11)N(2)O(4))(n)M.     

CdSe quantum dot-dispersed DOBAMBC: an electro-optical study

Cadmium selenide quantum dot (CdSe QD) has been used as a dopant in ferroelectric liquid crystal (FLC) 2-methylbutyl 4-(4-decyloxybenzylideneamino) cinnamate (DOBAMBC). Effect of CdSe QD in DOBAMBC on its different electro-optical (E-O) properties has been studied in the SmC* phase. The optical micrographs recorded for the pure and composite material are showing good dispersion of QDs in the FLC matrix. Micrographs of unaligned sample cell revealed that CdSe QDs induce homeotropic alignment of FLC molecules. An appreciable change in the value of E-O parameters like tilt angle, spontaneous polarisation and response time with shifting of SmA–SmC* phase transition temperature has been observed for CdSe QD–DOBAMBC composite. The observed properties of composite system have been discussed on the basis of surface properties of QDs in FLC system.     

Induced twisted-grain-boundary phases in the binary mixtures of a cholesteric and a nematic compound

Thermodynamical, optical-texture and dielectric studies have been performed to study the phase diagram of the binary system of 5-cholesten-3β-ol-octanoate and 4-n-nonyloxybenzoic acid. It is observed that low concentrations of 5-cholesten-3β-ol-octanoate (2–30?mol?%) in 4-n-nonyloxybenzoic acid induce a mean-field phase diagram derived by Renn within the framework of the chiral Chen–Lubenski model. Various optical textures of the twisted-grain-boundary (TGB) phases under different conditions of molecular anchoring have been observed. Weak transitions related to the TGB phases have been detected by temperature dependent dielectric spectroscopy.